The cleaning and maintenance methods of mineral fiber board mainly include the following aspects:
Daily cleaning: Use a soft mop or vacuum cleaner to clean the dust and debris on the floor regularly. Avoid using a hard-bristled brush or sharp objects to scratch the floor to avoid scratching the surface.
Prevent stains: Remove food, liquid and other stains in time. You can use a damp cloth to wipe, but make sure not to use too much water to avoid damaging the floor.
Avoid moisture: Mineral fiber floors are not resistant to moisture, so be sure to wring out the damp cloth slightly when wiping, and avoid using too much water to clean the floor.
Avoid overheating: Avoid placing hot objects directly on the floor, such as a kettle or iron, which may damage the surface of the floor.
Prevent scratches: For mobile furniture, you can add a protective pad to the bottom to reduce the probability of scratching the floor.
Regular maintenance: Every once in a while, you can use a special mineral fiber floor cleaner for deep cleaning. Operate according to the instructions for use of the cleaner.
Use cleaning liquid: You can use soapy water or alkaline cleaning liquid, soak a towel or sponge with cleaning liquid, and then wipe the surface of the fiber board. Note that the cleaning liquid should not be soaked too much to prevent the liquid from penetrating into the fiber board2.
Special cleaning agent: There are also cleaning agents specifically for mineral fiber boards on the market. The method of use is also to soak a towel or sponge, and then wipe the surface of the fiber board2.
Soft brush wiping: Hard brushes will scratch the surface of the fiber board, so it is recommended to use a soft brush to wipe slowly .
Decontamination paper: For smaller stains, you can use decontamination paper to wipe, but you need to pay attention not to use too much force to avoid damage to the surface
